|
|
|
||||||
| EXTRUSION COMPOUNDS | |||||||
| Product Code | Shore A | M100 | Tb | Eb | MFR | Ps | Cs |
| (Hs) | (psi) | (psi) | (%) | (230 C) | (%) | (%) | |
| TE-70500 | 0 | 15 | 666 | >1350 | 5.4 | 3 | |
| TE-70308 | 10 | 42 | 276 | 950 | 2.9 | 10 | 29 |
| TE-70015 | 15 | 33 | 1,131 | 1,180 | 0.85 | 11 | 18 |
| TE-70018 | 18 | 42 | 957 | 1,100 | 0.13 | 15 | 19 |
| TE-70120 | 20 | 54 | 928 | 1,110 | 1.3 | 30 | |
| TE-70122 | 22 | 48 | 1,261 | 1,160 | 1 | 25 | 28 |
| TE-70522 | 22 | 54 | 884 | 940 | 4.8 | 10 | |
| TP-9055ACL | 55 | 544 | 650 | 960 | 0.5 |
|
typical mold shrinkage values
(%)
Shore
Value:
1 A 2.1 – 3.5 2.1 – 3.0 18 A 1.8 – 2.0 1.8 – 2.0 40 A 1.4 – 1.5 1.4 – 1.5 60 A 1.3 – 1.4 1.4 – 1.5 80 A 1.1 – 1.2 1.3 – 1.4
|
|
|
suggested startup conditions
Shore A 20 or below
Rear Zone: 285 - 355 F Front Zone: 325 - 395 F Nozzle: 325 - 395 F Mold: 70 - 90 F Back Pressure: 50 - 150 psi |
|
|
Shore A 20 – 40
Rear Zone: 325 - 345 F Front Zone: 345 - 365 F Nozzle: 365 - 385 F Mold: 50 - 90 F Back Pressure: 25 - 75 psi |
|
|
Above 40A
Rear Zone: 360 - 380 F Front Zone: 390 - 410 F Nozzle: 420 - 430 F Mold: 100 - 140 F Back Pressure: 80 - 150 psi |